[Video] How To Locate Studs And Fish Wires At Home. Try This DIY Project, It’s Easy And Simple.

Fishing a wire from the attic to the basement, without cutting a hole in the wall makes for a bit of a challenge. But with careful planning, a few special tools, and the right techniques, running wires in the wall of your home may be easier than you might think.

If you want to install new lights in your house, you might need to run new wires. In order to do this safely, you’ll need to locate the studs in the wall first so you don’t unintentionally drill into them.

Running wires through walls is fairly straightforward. This article provides the step-by-step method for you to follow. If you’re ready to give it a try, let’s go ahead and get started.

Fish_Wires_in_Wall_&_locate_Studs0

Continue to the Next Page video: Easy Way to Fish Wires in Wall & locate Studs.

6 thoughts on “[Video] How To Locate Studs And Fish Wires At Home. Try This DIY Project, It’s Easy And Simple.

  • January 3, 2016 at 5:40 pm
    Permalink

    Cool tool, awful demo. Skip ahead to 6:00, you won’t miss anything important.

    Reply
  • January 3, 2016 at 8:10 pm
    Permalink

    it is a nice tool. I have something similar called a ‘Wire Python’ that works on the same principle.

    It’s called a HOLE SAW!!

    Reply
  • January 4, 2016 at 3:56 am
    Permalink

    show me 10 homes who are wirde that way and i show you 10 who are not, especially in walls who are empty inside, because the cable goes anyway it wants and doesnt not stay if not fixed exactly

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *