The Cheaper And Smarter Way To Notch Your Tubing Pipes At Home Without Specialty Tools.

Do you sometimes wonder how those angled tubes are made? This, my friend, happens through the process of notching.  Notching is a process used for cutting metal, either vertically or in a perpendicular manner.  Notching is usually done using specialty tools, which are either low or high in cost, depending on the tool to be used.

If you need anything done with your metal pipes, you’ll be happy to know that you don’t have to shell out big bucks just to get them done. All you need are the instructions in the video on the next page to get your pipes notched easily and inexpensively.

notching_tubing_pipe_without_specialty_tools-1Image source: sixtyfiveford

Move on to the Next Page video: Notching tubing pipe without specialty tools.

Next Page

12 thoughts on “The Cheaper And Smarter Way To Notch Your Tubing Pipes At Home Without Specialty Tools.

  • November 29, 2016 at 9:08 am
    Permalink

    Good idea, practical.

    Reply
  • December 6, 2016 at 8:31 pm
    Permalink

    Could you post some information or more video about what blade and saw you are using to cut your stock? I have been wanting to use an old mitre saw with a metal blade to cut stuff… needing some precise angles, but everyone keeps telling me it won’t work. Looks like it works for you, would love some additional information.

    Reply
    • December 7, 2016 at 8:26 pm
      Permalink

      We will try to find some for you.

      Reply
    • December 11, 2016 at 4:51 pm
      Permalink

      Cold cut saws, for metal turn at a much slower rpm than a miter saw for wood.

      Reply
    • December 13, 2016 at 5:05 pm
      Permalink

      there are abrasive blades “blades” that are for metalworking chop saws that should work just fine, its like an over-sized cut-off/die grinding wheel. check your local weld shop/gas supplier

      Reply
    • December 21, 2016 at 6:10 am
      Permalink

      It does work did that to one of mine and it works fine

      Reply
    • December 29, 2016 at 9:58 pm
      Permalink

      I have been using an old Milwaukee mitre saw as a metal chop saw for years, just make sure you remove all plastic parts that are near the blade because they will get hot and melt. Other than that it works great.

      Reply
    • March 5, 2018 at 3:08 pm
      Permalink

      It’s a evolution compound miter saw designed for metal working. I have one, they kick ass! It’s only $250 on Amazon too!

      Reply
  • December 8, 2016 at 4:55 am
    Permalink

    I used this method to build the complex landing gear on my experimental plane. IT WORKS. Keep’m coming. Great videos!

    Reply
  • December 24, 2016 at 6:59 pm
    Permalink

    Great idea to try here soon.. Thanks for the info

    Reply
  • July 9, 2017 at 2:04 pm
    Permalink

    Wonderful. This is just what I needed to build a gate.

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *